QUICKLOCK sleeves are available in lengths of 400mm
(DN 150 – DN 400) & 500mm (DN 450 – DN 800).
Components are manufactured from the tried, tested, quality materials of V4A stainless steel and EDPM rubber gaskets, ensuring a high life expectancy and durability, corrosion and heat resistance.
Tools required to install the QUICKLOCK system are a CCTV crawler camera, compressor and the QUICKLOCK packer & sleeves.
Accessible ducts of DN 800 – DN 1600 will require the use of the specially modified QUICKLOCK BIG system.
The two-part stainless steel ring of QUICKLOCK BIG can be inserted through existing manholes into circular man entry pipes, and positioned and installed manually within minutes.
This avoids the need to use any expensive machinery to remove any surrounding road surface. QUICKLOCK BIG is supplied in lengths of 200mm for DN 800 – DN 2000.
QUICKLOCK LINER END SLEEVE
The QUICKLOCK Liner End Sleeve seals and protects the ring space between the liner and old pipe.
In addition, the QUICKLOCK Liner End Sleeve also protects the liner end against the mechanical influences of high pressure cleaning.
QUICKLOCK Liner End Sleeves are supplied in lengths of: 250mm (DN 800 – DN 1600); 300mm (DN 450 – DN 600)
QUICKLOCK Liner End BIG services the range DN 700 – DN 1600.
The QUICKLOCK FLEX cuff can be used in the position deviations of pipe connections.
The functioning of the flex cuff is like that of the proven Quicklock system. Based on the compression principle and the materials V4A and EPDM.
Quicklock Flex was conceived for use in
radial offsets of up to 2.5 cm
and / or axle deviations up to max. 10° without ongoing preliminary preparations.
The QUICKLOCK MINI is for the renovation of damages in pipes with nominal diameters DN 100 and DN 125.
The Quicklock Mini seals the damage in a purely mechanical fashion. Based on the compression principle and the materials V4A and EPDM, which have been proven over decades. The offset packer, constructed specially for the Quicklock Mini, is equipped with an adjustable undercarriage.
You can get Quick-Lock mini in two configurations:
Variant 1: Overall length 90 mm, diameter DN 100 and DN125
Variant 2: Overall length 140 mm, diameter DN 100 and DN 125